
AW 750kW Wind Turbine - 47m or 54m rotor
When King-Sized Turbines Are Just Too Large
In an age of King-sized wind turbines designed for wide open spaces, Aeronautica Windpower is proud to introduce the 750 Series: Three-Quarter megawatt, 'Queen-size' machines designed for 'distributed wind' applications. Many good wind sites just cannot accommodate huge, utility-scale turbines. It is also ideal to be utilized for maximization of many state net metering legislations in place. A large number of sites, especially around populated areas,are better suited to a sub-utility size machine. The 750 is the perfect fit.
More easily permitted, erected, serviced, and financed than its larger cousins, the 750 Series is a great choice for community wind projects, commercial/industrial sites, college or high school campuses, and other places where 'behind the meter', or net-metered power can be utilized. Yet they are also powerful enough to be used as a lower height alternative for many wind farm operations.
Aeronautica 750kW wind turbines are built according to strict IEC 61400 guidelines in our ISO 9001 rated factory to insure the highest degree of quality for a long service life. The Internet-ready SCADA system provides remote access and viewing from remote locations. Our time-tested gearbox isolation system absorbs shocks with ease, adding to long term durability. These turbines are ultra-quiet and highly transportable to reach areas otherwise inaccessible to larger machines.
With its low profile, ultra-low noise signature, and highly efficient output, our 750's provide the perfect balance between economic output and acceptable size. And Aeronautica wind turbines are manufactured in the United States, reducing shipping costs and delivery times.

AW 750kW Power Curve

AW 750kW Annual Power Output

AW 47-750kW Specifications
Blades
3 blades, upwind orientation
Fiberglass reinforced polyester
Rotor
Power regulation: Active Stall Regulation (ASR)
Rotor size: 47m diameter (154')
Rotor speed: 25.3 rpm nominal
nominal Swept area: 1735 m2 (9,197 ft2)
Tilt angle: 4o
Coning angle: 3o Forward
Blades length: 21.0 m
Tip speed: 62-63 m/s (139-141 mph) at full load
Pitch angle: ASR
Pitch bearings: Slew ring (4-point ball bearings)
Air brake, normal: Pitch to -20o, actuated by the ASR System
Air brake, emergency: Pitch to -85o fail safe, activated by accumulators in the hub
Nominal Pitch Speed: 7.5o /sec
Mechanical brake: A fail-safe type disk brake
Brake torque: 1.8 times of nominal torque (approx.)
RPM max. value: 1600 (50Hz) / 1920 (60 Hz), on high-speed shaft
Generator
Nominal Electric Power: 200/750kW (dual wound)
Generator: Closed, asynchronous induction, 4/6 pole DW, IP54 or 55
Generator speed: 1000/1500 RPM (50 Hz) / 1200/1800 (60 Hz)
Loss in generator: Approx. 3% at full load
Generator cut-in: Thyristor controlled gradual cut-in
Grid connection: 690V
Connection Relay: SEL 547 Protective Relay (standard)
Operational
Yaw motors: 4 pcs. w/electrical brakes built in
Yaw brakes: 4 pcs. disc hydraulic brakes
Yaw bearing: Slew ring (4-point ball bearings)
Cut-in wind speed: 3m/s (6.7 mph), based on 10 min average
Cut-out wind speed: 25 m/s (56 mph), based on 2 min average
Survival Speed: 70 m/s (157 mph), (based on 50 year extreme)
Controller: Mita-Teknik
Op. Temp. Range: -30oC to +55oC (Very Low and Very High Temp options available)
Noise: 100 dBA Sound Power (at Nacelle), 8 m/s
Monopole Tower
Conical Steel, White: 50, 55, and 65m hub heights
Nacelle Access: Interior tower ladder through locked door
Surface Treatment: In accordance with ISO 12944
Laser inspected flanges, ultrasonic inspection of raw materials/welds
SCADA System
local and remote surveillance and operation
Safety Features
Induction generator has inherent anti-islanding
Fail-safe hydraulic disk brake
Grid monitoring for shutdown and operational performance
Fall protection ladder system
Lightning protection
AW 54-750kW Specifications
Blades
3 blades, upwind orientation
Fiberglass reinforced polyester
Rotor
Power regulation: Active Stall Regulation (ASR)
Rotor size: 54m diameter (177')
Rotor speed: 22.3 rpm nominal
nominal Swept area: 2,289 m2 (9,197 ft2)
Tilt angle: 4o
Coning angle: 3o Forward
Blades length: 26.0 m
Tip speed: 58-59 m/s (130-132 mph) at full load
Pitch angle: ASR
Pitch bearings: 4-point ball bearings
Air brake, normal: Pitch to -20o, actuated by the ASR System
Air brake, emergency: Pitch to -85o fail safe, activated by accumulators in the hub
Nominal Pitch Speed: 7.5o /sec
Mechanical brake: A fail-safe type disk brake
Brake torque: 1.8 times of nominal torque (approx.)
RPM max. value: 1600 (50Hz) / 1920 (60 Hz), on high-speed shaft
Generator
Nominal Electric Power: 200/750kW (dual wound)
Generator: Closed, asynchronous induction, 4/6 pole DW, IP54 or 55
Generator speed: 1000/1500 RPM (50 Hz) / 1200/1800 (60 Hz)
Loss in generator: Approx. 3% at full load
Generator cut-in: Thyristor controlled gradual cut-in
Grid connection: 690V
Connection Relay: SEL 547 Protective Relay (standard)
Operational:
Yaw motors: 4 pcs. w/electrical brakes built in
Yaw brakes: 4 pcs. disc hydraulic brakes
Yaw bearing: 4-point ball bearing
Cut-in wind speed: 3m/s (6.7 mph), based on 10 min average
Cut-out wind speed: 20 m/s (45 mph), based on 2 min average
Survival Speed: 60 m/s( 134 mph), (based on 50 year extreme)
Controller: Mita-Teknik
Op. Temp. Range: -30oC to +55oC (Very Low and Very High Temp options available)
Noise: 97 dBA Sound Power (at Nacelle), 8 m/s
Monopole Tower
Conical Steel, White: 50, 55, and 65m hub heights
Nacelle Access: Interior tower ladder through locked door
Surface Treatment: In accordance with ISO 12944
Laser inspected flanges, ultrasonic inspection of raw materials/welds
SCADA System
local and remote surveillance and operation
Safety Features
Induction generator has inherent anti-islanding
Fail-safe hydraulic disk brake
Grid monitoring for shutdown and operational performance
Fall protection ladder system
Lightning protection